Ceramic Products

Ceramic cloth is a woven fabric made from our high quality ceramic fiber yarn. It can be used for high temperature applications up to 2300 F. The cloth is reinforced with fiberglass filament, and optional Inconel/alloy steel wire. Ceramic fiber textiles (cloth, tape and rope) contain a certain amount of binder material which is normally burned at lower temperature and does not affect the insulation property.

Typical applications of ceramic fiber cloth include:

• Expansion joints,

• Safety blankets,

• Curtains,

• Welding blankets,

• Protective and insulating covers,

• Shields, gaskets, cable or pipe wrapping, etc.

It has been widely used in welding, foundry works, aluminum and steel mills, boiler insulation and seal, shipyards, refineries, power plants and chemical plants. Recommended Working Temperature : 1,800 F

Available sizes: 1.5MM, 2MM, 3MM, 6mm
Width: 40"
Length: As per specification & requirement.

Shree firepack textile family includes ceramic fiber ropes, braids, cloth, tapes, and sleeving. shree firepack ceramic fiber textiles are made from alumina-silica ceramic fiber, free of asbestos. These ceramic fiber textile materials can be used in different industrial applications under temperatures up to 2300 °F (1260 °C) and have excellent chemical stability and strong resistance to thermal shock and corrosion attack. Exceptions are hydrofluoric and phosphoric acids and concentrated alkalies. shree firepack ceramic fiber textiles also resist oxidation and reduction. If wet by water or steam, thermal properties are completely restored upon drying. No water of hydration is present.


Shree firepack textiles contain 15% organic carriers, which helps to establish physical formation of products. The carriers burn out at about 750 °F (400 °C). shree firepack ceramic fiber textiles also contain reinforcement insert materials of either inconel wire or continuous fiberglass filament to increase handling strength during installation and enhance fiber durability to rated temperatures of 2000 °F (1093 °C) for inconel wire and 1200 °F (649 °C) for fiberglass filament.

Ceramic braided packing are dense, high performance packing fabricated from ceramic fiber yarn braided around a core of ceramic fiber rope either to form a packing in Round or Square section.


Application

• Replacement of asbestos rope for heat treat furnace, seals for stove and ovens, expansion joint packing, bulk in tadpole gaskets, gaskets and seals.
• Sealing of oven, furnace or boiler doors.

Other major application:

Other Information

• Minimum Order Quantity: 50

We are manufacturers ceramic tape that are fabricated using high quality ceramic fiber yarn and are reinforced with fiberglass filament & ss wire. Ceramic tape are woven fabrics made from ceramic yarn. Ceramic cloth tape are available in a variety of thickness from 3 - 6mm. The standard width of the ceramic tape is 25mm~100mm. Custom widths are available against request. Woven ceramic tapes / strips are available in width from 25-100mm.

Ceramic fiber tape are used for insulating covers or shields, cable or pipe wrapping, expansion joints, high temperature seals or gaskets.

Our range of ceramic tapes finds application in the following sectors:

• Welding

• Foundry works

• Aluminum and steel mills

• Boiler insulation and seal

• Exhaust systems

• Shipyards

• Refineries

• Power plants

• Chemical plants

Major usage: fire protection, pipe hanger insulation, insulation of industrial chimney, radiant heat shields, filtration media, electrical insulation, expansion joint, gaskets and wrapping material, laminates, gaskets and seals, boiler tadpole gaskets, welding and stress relieving curtains, lacing tape, cable insulation and protection against high temperature.

Other Information

• Minimum Order Quantity: 50
• Port of Dispatch: Narol,Ahmedabad

Ceramic fiber board is made from refractory fibers and binders which have low organic content, the mixture is vaccuum processed into boards that keep good mechanical strength after heating.
 
Characteristics

• Low thermal conductivity
• Resistance to thermal shock
• Greater mechanical strength
• Even density, thickness
• Can withstand gas flow velocity of 30 m/sec
• Easy to cut or install
• Good erosion resistance
• Shorter heat up and cool down time
• Asbestos free

Applications

• Hot face lining of ceramic kilns
• Insulation for kiln car
• Furnace door insulatio
• Ducts insulation
• General thermal barriers
• High temperature insulation

Ceramic fiber blanket is made from high purity alumina-ailica (and zirconia), double needling enhances the physical properties of the blanket, conferring good handle ability, durability and resistance to laminating.

Characteristics

• Double needled blanket
• Low density
• Low thermal conductivity
• Shorter heat up and cool down time
• Resilience and resistance to thermal shock
• Flexible and easy to cut and install
• Contain no organic binder
• Asbestos free

Applications

• Lining for furnaces, kiln and oven
• Expansion joints and seals for furnace, kiln and oven
• Back-up installation
• Lagging of high temperature pipe work
• High temperature filtration
• Steam turbine and nuclear insulation
• Fire protection